Tag Archives: Peg Hat Rack

DIY Peg Hat Rack

An interchangeable timber peg board is a way to solve your messy hallway problem.

Check out this how-to video to create this cracker of a rack to hang your hats, coats and umbrellas. Just change the position of the pegs to suit your needs and your entrance or hallway mess is gone.

Have a look at the photos below to see how easy it is to make this peg-style rack.

Go and watch the video above which will show you step-by-step on how to make your very own Peg Hat Rack or can also check below the steps.

Step 1 – Measure and mark plywood

First up, work out how big you want your peg board to be. Mine is about 800mm long. Measure and mark plywood. 

150422H+scotty-3876

Step 2 – Cut down to size

Cut plywood down to size using a drop saw. You could use a handsaw – but make sure you make it nice and straight by using a square by using a square to mark it out. 

150422H+scotty-3879

Step 3 – Light sanding

I like to give the timber a light sand before I do anything more.

150422H+scotty-3881

Step 4 – Mark it with your ruler

Now you’ve got to mark out the pegs – you’ve got to be very accurate with this! Measure 50mm from the top then divide by four equal spots coming down the timber. Then divvy up the width of the timber to work out how many pegs you’re going to need. 

150422H+scotty-3885

150422H+scotty-3889

Step 5 – Drill the holes in

Once you’ve marked out your grid system drill the holes for the pegs. Go as deep as you can without going right through, then give the entire board a good sanding. Stain it, if you like. 

150422H+scotty-3893

150422H+scotty-3896

150422H+scotty-3902

150422H+scotty-3905

150422H+scotty-3907

Step 6 – Cut your dowel pieces

Cut your 25mm dowel to length into as many pieces as you want – I cut eight – making sure they’re all the same length. Paint the ends for a big of colour.

150422H+scotty-3912

150422H+scotty-3919

150422H+scotty-3926

Step 7 – Place the peg piece where you like 

Place pegs along the board wherever you want hats and coats to hang. Move the pegs around wherever you like.

150422H+scotty-3930

Final result: DIY Peg Hat Rack
 150422H+scotty-4474

 

Related: Do it Yourself

DIY Timber Drink Stand

A Timber Drink Stand to solve your dilemma when having a drink or eating food whilst watching some telly. Watch this how-to video where I show you how you too can create a Timber Drink Stand for your armchair. Have a look at the photos and ... [read more]

DIY crate – it’s easy mate

  There are lots of second-hand crates around that look great and are really handy around the house. They can be expensive though, so check out the how-to video above to learn how you can make your own crate at a fraction of the cost of a sho ... [read more]